Payment & Shipping Terms:
|Function:||For Water Dispenser Sterilization||Ozone Output:||2000mg/hour|
|Electricity Supply:||220V/50Hz||HS Code:||85169090|
water dispenser components,
water dispenser replacement parts
Ozone sterilizer for water dispenser sterilization YX-2000 with ozone output at 2000mg per hour
1. Preparation of the water dispenser: take off the water bottle from water dispenser, drain the remaining water in the water dispenser,
clean water faucet, then place a clean empty bottle on the water dispenser.
2. Connect the two silica gel of YX-2000 to the two faucets of water dispenser; turn on the faucets of water dispenser.
3. Plug into the electric supply to switch on ozone sterilizer, press the startup button, then the ozone generator starts to work automatically. Choose the proper time for sterilizing, 10 minutes per month, 20 minutes per two months, 30minutes per three months. it's just for reference.
4. After the disinfection, turn off the power, and disconnect the silica gel pipes from the faucets, close the ozone generator box with locking,
turn off the faucets of water dispenser.
5. Take off the empty water bottle from the water dispenser, then place bottle of pure water to the water dispenser, open the faucet and use about 300ml water to flush the water pipes. After that, the pure water is drinkable.
|Item name||Ozone sterilizer for water dispenser|
|Ozone generation rate||2000mg/h|
|Unit dimension||335 x 220 x 165mm|
|Unit Packing size||350 x 235 x 180mm|
Image for reference: